ZQ-13 Pneumatic Rock Loader in Action at an African Mine

HNYT is sharing customer-supplied video of a Cargadora neumática de rocas ZQ-13 working underground in Africa. The footage shows the machine beside a rock pile, with an operator using its side controls as the bucket moves through the loading sequence. For mining teams considering a compact air loader for small tunnels, the video provides a close view of the equipment in its working environment, including the rails, air hose and space around the machine.

Customer Footage from the Underground Working Area

The approximately 75-second video follows the loader at close range inside a rock-walled mine roadway. The operator stands beside the machine, with the control levers within reach. Different views show the bucket near the broken material, the lifting assembly, the rail wheels and the connected air line.

These details put the loading task in context. Broken rock occupies part of the working area, while the rails define the machine’s travel path. The camera also records the bucket changing position during operation, giving prospective users a view of how the loader and operator work within the available space.

The footage is a record of equipment use at the customer’s site. It does not establish hourly output or long-term availability; those results depend on operating records, material conditions and the complete loading and haulage arrangement.

A Compact 12B-Type Air Loader for Small Mine Tunnels

The ZQ-13 is a Chinese-built 12B-type air loader designed for loading broken rock in compact underground workings. It uses compressed air and a rail-mounted, single-bucket arrangement. The bucket gathers material at the front and lifts it for discharge toward receiving equipment behind the machine.

This arrangement links rock clearance at the face with mine-car haulage. In small tunnels, equipment selection needs to account for the bucket’s full movement as well as the space occupied by the machine body.

En ZQ-13 air rock loader product page gives the following standard reference specifications:

ItemPublished ZQ-13 reference
Bucket volume0.13 m³
Tunnel width × heightAt least 1.7 × 1.9 m
Overall length × width × height2,230 × 1,200 × 1,200 mm
Rail gauge options600 / 762 / 900 mm
Working air pressure0.45–0.86 MPa

These are model references, not measurements of the customer’s mine or confirmation of this machine’s supplied configuration. Confirm the operating clearance, rail gauge and air requirements for each order. The 12B-type description identifies the loader format; replacement-part compatibility should be checked separately.

What Matters When Matching a Loader to a Small Tunnel

HNYT’s rock loader selection guide explains why bucket volume alone is insufficient for model selection. A machine may fit inside a roadway while still needing more space for bucket lifting and discharge.

For a similar installation, check the tunnel profile along the full working movement, then review the track gauge, gradient and receiving mine car. The car’s height and position need to suit the discharge path. Rock size and the availability of empty cars also affect how the loading task connects with underground transport.

The customer video offers useful visual context for these checks, although the site dimensions and mine-car specification are not provided.

Air Supply Supports Consistent Loader Operation

Compressed-air performance is another practical consideration. As explained in HNYT’s article on why an air rock loader loses power, the pressure available at the machine during operation matters more than an unloaded reading at the compressor.

Long or restricted hoses, leaking connections and other tools sharing the supply can reduce the air reaching the loader. Air-line water, filtration and lubrication also deserve attention under the equipment’s maintenance instructions. Reviewing these conditions helps operators investigate weak travel or slow bucket movement before assuming that an air motor needs replacement.

These are general operating considerations for pneumatic loaders, rather than faults reported at this customer’s site.

Discuss a ZQ-13 Configuration for Your Mine

For mines planning small-tunnel rock loading, the customer footage provides a practical starting point for discussing the working layout and equipment requirements.

Send HNYT your loading requirements, including the required quantity, tunnel width and height, gradient, rail gauge, rock size, target output, available air pressure and flow, and receiving mine-car dimensions. Site photographs or a short video can help the team review a suitable ZQ-13 configuration and prepare a quotation.

 

es_ESSpanish